Contax i4R ユーザーズマニュアル
EN-135
Install the USB driver
(Windows 98, Windows 98SE Only)
If you are using Windows 98 or Windows 98SE, you will need to install the
USB drivers. A USB driver is included on the CD-ROM ("Instruction
Manual" and USB driver) supplied with the camera.
USB drivers. A USB driver is included on the CD-ROM ("Instruction
Manual" and USB driver) supplied with the camera.
1
Turn the PC on and start up Windows.
2
Insert the CD-ROM provided ("Instruction Manual" and USB
driver) into the CD-ROM drive in your PC.
The program on the CD-ROM automatically starts up. If the program does not start automatically, double-
click the [CONTAXi4R] icon in [My Computer].
click the [CONTAXi4R] icon in [My Computer].
3
When the language selection screen appears, click the
language to be used.
4
Click [Install USB drivers].
Installation begins. Proceed with the installation as directed by the on-
screen instructions.
screen instructions.
5
When the [InstallShield Wizard Complete]
message appears, make sure that the
[Yes, I want to restart my computer now.]
option is checked, then click [Finish].
Installation ends and the PC restarts.
A
Important
Do not connect the USB cable until the USB driver installation is complete. Connecting the
USB cable prior to installation will prevent successful USB driver installation. If you have
mistakenly connected the USB cable, see "Deleting the Device (Windows 98 and
Windows 98SE only)" (Æ p.142).
USB cable prior to installation will prevent successful USB driver installation. If you have
mistakenly connected the USB cable, see "Deleting the Device (Windows 98 and
Windows 98SE only)" (Æ p.142).
A
Important
If installation fails, uninstall the drivers as described in "Deleting the Device
(Windows 98 and Windows 98SE only)" (Æ p.142) and then install the drivers again.
(Windows 98 and Windows 98SE only)" (Æ p.142) and then install the drivers again.