Contax i4R ユーザーズマニュアル

Troubleshooting

Problems and Solutions

Problem

Cause

Solution

Page

Nothing appears 
on the LCD 
monitor.

The batteries are flat, or the 
Lithium Ion battery pack is 
not inserted.

Insert the Lithium Ion battery 
pack into the camera and 
recharge the camera.

The Power Save function 
has turned the camera off.

Turn the camera on again.

The LCD 
monitor is blank.

If you leave the camera for a 
while without using it, the 
camera goes into Sleep 
mode.

Press the shutter release button 
half way or press any other 
camera button to restore the 
camera to Shooting mode. The 
details vary depending on the 
Power Save function settings.

There is something 
generating a magnetic field 
(such as a magnet or TV) 
close to the camera.

Move the camera further away 
from the magnetic object.

-

A video cable is connected 
to the USB cradle the 
camera is placed in.

Disconnect the video cable from 
the USB cradle.

There's no 
image on the TV.

You are using the wrong 
video output format.

Use the correct video output 
format for the TV.

The number of 
available shots 
did not change 
when I took a 
picture.

This is because the 
photographed image size 
was small.

This is dependent on factors 
such as the number of pixels 
and the subject and is not a 
problem.

-

I cannot erase 
an image. "U" 
icon displayed.

The image is protected.

Unprotect the image.