Contax U4R ユーザーズマニュアル

2

Move the selector lever up u to select 

[EXECUTE], then press E.

A message appears asking you to confirm that you want to print the 
images.
Refer to  "Specifying the print settings"  (Æ p.130) to change print 
settings.

3

Move the selector lever up u to select 

[EXECUTE], then press E.

Printing begins, and when printing is successfully completed, the print 
completion screen appears.

Ending PictBridge

B

Note

Press the MENU button K to display the print 
menu screen.

A

Important

If an error occurs during printing, an error 
message is displayed and printing stops. Refer to 
p.190 for information on the message displayed 
and the correct response.

B

Note

• You can specify the print settings by clicking the 

SCENE button I before proceeding with this 
step. (See steps 2 to 12 on p.130 for information 
on the setting procedure.)

• The number of copies and date imprinting 

settings are not shown because the DPOF 
settings take precedence.

• During printing, a counter on the LCD monitor 

displays the total number of prints and the 
number of prints completed so far.

• Press the MENU button K to stop printing in 

progress.

If the F symbol is displayed (PictBridge)

If the printer is connected using PictBridge, the F symbol may be displayed in the top left of the LCD 
monitor. If this happens, a warning message has been received from the printer. Make sure to check the 
printer.
Further, also make sure to refer to instructions provided with the printer.

EXECUTE

CANCEL

DPOF PRINTING

DPOF

3 PRTS
OFF 

INDEX SET

EXECUTE

CANCEL

EXECUTE PRINT?

PAPER TYPE
BORDERLESS
DATE

2L

PRINT QTY.
PAPER SIZE

PHOTO

YES

––––

––––