Contax U4R ユーザーズマニュアル
EN-33
Turning the Camera On
1
Press the POWER button H.
The startup screen is displayed for a few seconds and then the normal
screen for the selected camera mode appears.
screen for the selected camera mode appears.
A
Important
Check that a memory card is inserted in the camera before turning the camera on.
B
Note
• While the camera is turned on, press the POWER button H again to turn the camera
off.
• You can configure whether the camera starts in still image mode when it is turned on or
if it returns to same mode as when it was turned off. (Æ p.180)
Viewing the battery level and charging guide
When the battery charge is completely depleted, the "LOW BATTERY"
message appears on the LCD monitor.
The amount of power consumed by a digital camera varies
considerably depending on the environment in which it is being
used. Even if the battery level indicator shows that there is still
charge in the batteries, the camera may turn itself off in some
camera operating conditions. Recharge the battery if this happens.
message appears on the LCD monitor.
The amount of power consumed by a digital camera varies
considerably depending on the environment in which it is being
used. Even if the battery level indicator shows that there is still
charge in the batteries, the camera may turn itself off in some
camera operating conditions. Recharge the battery if this happens.
Battery fully
charged.
charged.
Approximately
70% used.
70% used.
Remaining
charge very low.
Charge the
battery soon.
charge very low.
Charge the
battery soon.
Camera will not
operate. Charge
the battery.
operate. Charge
the battery.
LOW BATTERY