Contax U4R ユーザーズマニュアル
EN-69
[ISO] Changing the ISO Sensitivity to Shoot Fast
Moving Subjects
«Applicable mode: C»
The [ISO] setting corresponds to the ISO value of conventional film and
indicates sensitivity to light.
The ISO sensitivity options in this mode are [AUTO], [50], [100], [200] and
[400]. The default setting is [AUTO], in which case the camera
automatically chooses the ISO sensitivity to suit the ambient conditions.
Although the image quality is worse for higher values, the sensitivity to
light is better, allowing you to take shots in dark locations and use the
high-speed shutter. This also slightly increases the effective range of the
flash.
indicates sensitivity to light.
The ISO sensitivity options in this mode are [AUTO], [50], [100], [200] and
[400]. The default setting is [AUTO], in which case the camera
automatically chooses the ISO sensitivity to suit the ambient conditions.
Although the image quality is worse for higher values, the sensitivity to
light is better, allowing you to take shots in dark locations and use the
high-speed shutter. This also slightly increases the effective range of the
flash.
1
Turn the camera on and press the mode
buttons UD until "C" lights up on the
mode select LED.
2
Press the MENU button K to display the menu icons.
3
Move the selector lever left l or right r
to select ISO [K] and press E.
4
Move the selector lever up u or down d
to select the desired sensitivity and press
E
.
The ISO sensitivity is now set.
(No icon) [AUTO]: The camera sets the ISO sensitivity to suit the
(No icon) [AUTO]: The camera sets the ISO sensitivity to suit the
ambient conditions. (Default)
[ISO50]
[50]
: Fixed at ISO 50
[ISO100] [100]
: Fixed at ISO 100
[ISO200] [200]
: Fixed at ISO 200
[ISO400] [400]
: Fixed at ISO 400
ISO
AUTO
50
100
200
400