Contec BX710P2-AC ユーザーズマニュアル
Ver.1.01
BX-710-AC, BX710P2-AC, BX710P4-AC
2
Functional Specifications
Model BX-710-AC5
BX-710P2-AC5
BX-710P4-AC5
CPU
Ultra Low Voltage Intel® Celeron® M Processor 1.06GHz (FSB533MHz)
Chip set
Intel® 945GME + ICH7M-DH
BIOS
BIOS (mfd. by Award)
Memory
1GB, 200pin SO-DIMM socket, PC2-4300 (DDR2 533) DDR2 SDRAM support
Graphic
Controller
Built in Intel 945GME
Video RAM
Main memory shared
Video
BIOS
64KB(C0000H-CFFFFH)
Analog RGB
640 x 480, 800 x 600, 1,024 x 768, 1,152 x 864, 1,280 x 600, 1,280 x 720, 1,280 x 768, 1,280 x 960, 1,280 x 1,024, 1,360 x 768,
1,400 x 1,050, 1,600 x 900, 1,600 x 1,200, 1,856 x 1,392, 1,920 x 1,080, 1,920 x 1,200, 1,920 x 1,400, 2,048 x 1,536 (16,770,000
1,400 x 1,050, 1,600 x 900, 1,600 x 1,200, 1,856 x 1,392, 1,920 x 1,080, 1,920 x 1,200, 1,920 x 1,400, 2,048 x 1,536 (16,770,000
colors)
System
resolution
resolution
LVDS
640 x 480, 800 x 600, 1,024 x 768 (26,000,000 colors)
Audio
AC97 compliant, LINE OUT x 1, MIC IN x 1
Storage
SATA
Serial ATA 1.0 compliant support: 1 port
LAN Intel®
82573L
Controller
1000BASE-T/100BASE-TX/10BASE-T x 2 (Wake On LAN support only A side of the main body silk.)
USB
USB 2.0-compliant 6 port
Serial I/F
RS-232C (general-purpose) : 2 port, Baud rate : 50 - 115,200bps
RS-232C (for touch panel communication) : 1 port, RS-422/485 (general-purpose): 1 port, Baud rate : 50 - 115,200bps
RS-232C (for touch panel communication) : 1 port, RS-422/485 (general-purpose): 1 port, Baud rate : 50 - 115,200bps
Watch dog timer
1sec - 255sec (RESET, interrupt or external output is allowed at time expiration)
RAS
Remote reset
External input signal
General-purpose I/O
3 opto-isolated inputs and outputs (However, one output also serves as an external WDT output and one input also serves as
remote reset. They become available when switched.)
remote reset. They become available when switched.)
Hardware monitoring
Monitoring CPU temperature, board temperature, power voltage
RTC/CMOS
ICH7M-DH built in. The real-time clock is accurate within 3 minutes (at 25 C) per month.
Lithium backup battery life: 10 years or more
Lithium backup battery life: 10 years or more
Power Management
Power management setup via BIOS. Modem Ring On/Wake One LAN.
Supports PC98/PC99 ACPI Power management.
Supports PC98/PC99 ACPI Power management.
Interface
Display 2
port
(15pin HD-SUB connector [Analog RGB] x 1, 26 pin half pitch connector [LVDS] x 1)
Audio
LINE OUT:
φ3.5 Stereo mini jack, Full-scale output level 1.5Vrms (Typ.), Dual 50mW Amplifier
MIC IN:
φ3.5 Stereo mini jack, Full-scale input level 1.6Vrms (Typ.)
CF card slot
2 slots (CF1/CF2), CF CARD Type I, bootable
Windows Embedded Standard pre-install CF model : CF (2GB) is finished mounting (one partition)
Windows Embedded Standard pre-install CF model : CF (2GB) is finished mounting (one partition)
HDD
2 slots , Slot-in method, 2.5 inches SATA hard disk
Windows XP Professional pre-install model : SATA HDD (80GB) is finished mounting (one partition)
Windows Embedded Standard pre-install SSD model : SATA SSD (2GB) is finished mounting (one partition)
The other model : It is not mounted.
Windows XP Professional pre-install model : SATA HDD (80GB) is finished mounting (one partition)
Windows Embedded Standard pre-install SSD model : SATA SSD (2GB) is finished mounting (one partition)
The other model : It is not mounted.
LAN*2
2 port (RJ-45 connector)
USB
6 port (A-TYPE connector)
RS-232C
2 port (9 pin D-SUB connector [male])
RS-422/485/
General-purpose I/O/RAS
1 port (15 pin D-SUB connector [female])
Expansion board slot
None
PCI slot x 2,
Usable board dimension : 240mm (Max.)
Usable board dimension : 240mm (Max.)
PCI slot x 4,
Usable board dimension : 240mm (Max.)
Usable board dimension : 240mm (Max.)
Power supply connector
100-240VAC(50/60Hz) input automatic operation switch
Input power supply voltage
85 - 264VAC (47 - 63Hz)
Current consumption
90VA (Max.)
115VA (Max.)
130VA (Max.)
Expansion board power supply
capacity
capacity
None
+12V
0.5A, +5V 1A,
+3.3V
1A, -12V 80mA,
-5V Not
supplied
+12V
0.5A, +5V 2A,
+3.3V
2A, -12V 80mA,
-5V Not
supplied
Power supply
External device power supply
capacity
capacity
CF card slot
: +5V
: +5V
500mA *1
USB I/F
: +5V
3A (500mA×6) *1
CF card slot
: +5V
: +5V
500mA *1
USB I/F
: +5V
3A (500mA×6) *1
Expansion board slot
(total 2 slot)
: +12V 0.5A, +5V 1A *1,
(total 2 slot)
: +12V 0.5A, +5V 1A *1,
+3.3V 1A, -12V 80mA,
-5V
Not supplied
CF card slot
+5V 500mA *1
USB I/F
+5V 500mA *1
USB I/F
: +5V
3A (500mA×6) *1
Expansion board slot
(total 4 slot)
: +12V 0.5A, +5V 2A *1,
(total 4 slot)
: +12V 0.5A, +5V 2A *1,
+3.3V 2A, -12V 80mA,
-5V
Not supplied
Physical dimensions
(mm)
262(W) x 262(D) x 55(H)
(No protrusion)
(No protrusion)
262(W) x 262(D) x 115(H)
(No protrusion)
(No protrusion)
262(W) x 262(D) x 155(H)
(No protrusion)
(No protrusion)
Weight
約
3.1kg
(At the time of the HDD(SSD)
uninstalling)
uninstalling)
約
3.9kg
(At the time of the HDD(SSD)
uninstalling)
uninstalling)
約
4.3kg
(At the time of the HDD(SSD)
uninstalling)
uninstalling)
*1 The total of the external device power supply load for +5V should be 3A or lower. * The PCI bus slot is for 32 bit specification. No operational tests are done for the 32/64 bit boards.
Features