Fortinet FortiGate Voice 4.0 MR1 ユーザーズマニュアル

You can monitor incoming and outgoing calls from PBX > Monitor > Active Call. 
You can view information for all active calls including the originator of the call (From) the 
destination of the call (To), how long the call has been active (Duration), the codec used 
for transmitting voice packets, and the status of the call.

You can monitor status of the external SIP trunks or VoIP service providers that you have 
added to the FortiGate Voice configuration. To monitor SIP trunk or VoIP service provider 
status go to PBX > Monitor > SIP Trunk Status. 
For each service provider you can see the name of the service provider, the host name of 
the SIP server that the FortiGate Voice unit connects to, the account type, the username 
for the account, and the state of the relationship between the FortiGate Voice unit and the 
service provide. If status is Registered the FortiGate Voice unit is able to connect to and 
register with the service provider. 

You can monitor the status of the extensions added to the FortiGate Voice configuration. 
Status information includes the extension number and the Host name or IP address of the 
extension as registered with the FortiGate Voice unit. To monitor extension status go to 
PBX > Monitor > Extension Status. 
If the information displayed about an extension includes a host name or IP address the 
extension is operating and can send or receive calls with the FortiGate Voice unit. If no 
host name or IP address is displayed the extension cannot communicate with the 
FortiGate Voice unit. For example, the extension could be shut down or not able to 
connect to the FortiGate Voice because of network issues or configuration problems with 
the configuration of the extension phone or softphone.

Enter the exact pattern that PBX users dial to get their voicemail. For 

example, for users to dial *99 to get their voice mail, enter *99.

The number that PBX users must dial to get an outside line. For example, if 

users should dial 9 to get an outside line, add 9 to this field. The outgoing 

prefix should not be the same as the first number of the extension range.

Select No Limit if you don’t want to limit the voice mail duration. Otherwise 

enter a maximum time in seconds for voice mail recordings.

Enter the email server IP address or domain name. The FortiGate Voice unit 

uses this email server for sending voicemail notification emails to PBX users.

Select if the email server requires authentication. If you enable authentication 

you must also add a username and password.

Enter a valid username for an account on the email server.

Enter the password for the account on the email sever.