Focus Enhancements DVCPRO/DV ユーザーズマニュアル

These parameters are only available for NTSC and only one may 

be enabled at a time. Drop and non-drop enable and disable the 

drop-frame function that modifies how the timecode is calculated 

during recording. 

•

 

Enables the drop-frame function:

 from each minute of video 

recorded, except for those minutes evenly divisible by ten. 

•

  

Disables drop-frame. No frames are dropped during 

recording and the timecode reflects the actual time during 

recording. 

Use with TC FREE RUN or TC REGEN
TC DROP and TC NON-DROP may only be set when using the TC FREE 
RUN or TC REGEN settings. 

Type of Separator Indicates TC DROP or NON-DROP 
The timecode displayed on the LCD indicates the TC DROP/NON-DROP 
mode by using either a semi-colon or a colon as a separator between hours, 
minutes, seconds and frames:

• DROP               HH

MM

SS

FF 

• NON-DROP      HH

MM

SS

FF