Fitness Quest 1600 ユーザーズマニュアル

STEP 1 - Upright Assembly

a) Stand on Walking Belt and grip the

uprights and slowly raise them into
the assembled position. Secure the
right side with (2) M8 x 20mm Allen
Bolts, (1) M8 Washer and (1) M8
Curved Washer at the bottom of the
right Upright as shown in Figure 1.

Repeat on other side.

b) Use the Allen Wrench

provided to tighten.

STEP 2 - Console Base Assembly

Note: To assure Console Base Assembly does
not fall, hold onto Hand Grips while assembling.

a) Make sure the wires are connected on the

right side. See Figure 2a.

b) While standing on the Walking Belt put the

Console Base Assembly in the user position by
pivoting it carefully down. See Figure 2b.

Note: During assembly, DO NOT
PINCH WIRES when the
Console is folded down
and secured to the Upright.

c) Attach the Console

Base Assembly to the
Uprights by using an
M8 x 20mm Allen Bolt
and M8 Curved Washer.

Repeat on other side.

Tighten with Allen Wrench
provided. See Figure 2c.

upright

RIGHT SIDE

M8 curved

washer

Figure 1 - Install Uprights

Figure 2 - Install Console Base

M8 x 20mm

allen bolt

M8 washer

M8 x 20mm allen bolt

M8 curved

washer

walking belt

console

base

assembly

upright

hand

grip

Note: We recommend setting up the
unit in the area where it will be used.

Remove Box Top. Collapse Box Bottom
and leave unit in box to assemble.