Classe CT-M300 Monaural ユーザーズマニュアル

Installation

Your new Classé amplifier is quite simple to set up and enjoy. Please follow the

steps outlined below in order to safely set up and use your new amplifier.

Important:

The AC mains connection should be the last connection you

make on your new power amplifier. In addition, it is always

a good idea to power up your power amplifier(s) last, after

everything else has been powered up and has stabilized.

Conversely, it is good practice to power the amplifier(s)

down first when shutting down the system, as this

prevents any transients from other components from

getting through to your loudspeakers.

1. Unpack everything according to the included instructions.

Be careful when doing so, as this amplifier is quite heavy.

2. Place your amplifier (be sure to read “Unpacking and Placement”)

and connect it to the AC mains. This includes deciding on the location,

making sure you have adequate ventilation, and adequate clearance for all the

wires behind the amplifier. Once accomplished, connect the amplifier directly to

the AC mains. Do not use extension cords, as most are not suitable for the current

sometimes required by your amplifier.

CT-M300 rack-mount

installation

FOR RACK MOUNTING INSTALLATION CONTACT YOUR CLASSÉ

PROFESSIONAL.

CT-M300 stand-alone

installation instructions

NON-RACK-MOUNT INSTALLATION FOR CT-M300:

1a. Install (4) feet and secure with (4) #6 flat washers and

(4) 6-32 X 9/16 philips pan head screws.

Tighten to

5.0 in-lbs (0.56 N-m)