FIC M295 ユーザーズマニュアル
Installation and Upgrade
2.3.6 Memory Upgrade Procedure
The notebook computer offers two 64-bit memory slot using 144-pin SODIMM (Small
Outline Dual Inline Memory Module) at 128MB and 512MB SDRAM. Two memory slots are
found inside the memory compartment. The memory compartment is located on the underside
of your computer inside the memory compartment. The notebook has no memory on-board so
you should have at least one SODIMM module inserted.
Outline Dual Inline Memory Module) at 128MB and 512MB SDRAM. Two memory slots are
found inside the memory compartment. The memory compartment is located on the underside
of your computer inside the memory compartment. The notebook has no memory on-board so
you should have at least one SODIMM module inserted.
With two memory slots, you can have several combinations up to 1024MB.
n/p
Tilt Foot
o
Mini-PCI Socket Compartment
q
Memory Compartment
r
Battery Compartment
s
Battery Release Latch
Figure 2-11
Memory Compartment Door
Using the Memory Slot inside the Memory Compartment
Follow the steps below on how to upgrade the memory modules:
1. Make sure the system is powered off and that no peripheral devices are attached.
2. Turn the system over and locate the screw on the memory compartment.
Follow the steps below on how to upgrade the memory modules:
1. Make sure the system is powered off and that no peripheral devices are attached.
2. Turn the system over and locate the screw on the memory compartment.
3. Remove the screw and open the memory compartment. Locate the alignment notch on the
module.
2-12
FIC M295/M296 Service Manual