FARGO electronic CUPS HDP5000 ユーザーズマニュアル
Using the Command Line Option Setup for
CUPS
CUPS
Adding a USB Printer
The primary CUPS interface can be accessed on the local computer using a web
browser. The address for the CUPS interface is: http://localhost:631/
browser. The address for the CUPS interface is: http://localhost:631/
Step Procedure
1
Attach Power and USB to the printer.
2
From a Terminal window, run lshal to retrieve the list of devices.
3
Refer to the Example Output for lshal below for a sample of output to look for to identify
the printer. Record the Device URI to be able to add the printer.
the printer. Record the Device URI to be able to add the printer.
Example Device URI:
/org/freedesktop/Hal/devices/usb_device_9b0_2110_A8010217_if0_printer_A8010217
4 Choose
Add Printer. (Note: If you are asked for a username and password, enter your
login username and password or the “root” username and password.)
5
a. Enter a Name, Location and Description for the Printer.
b. Click
Continue.
6
a. If an entry exists in the dropdown, select the HAL Printing backend option
OR
b. Select Internet Printing protocol (ipp)
c. Click
Continue.
7
a. Enter the Device URI recorded previously using the HAL printer Backend
Example:
hal:///org/freedesktop/Hal/devices/usb_device_9b0_2110_A8010217_if0_printer_A8010217
b.
Click Continue.
8
a. Select Fargo Electronics from the Make list.
b. Click
Continue.
Note: If Fargo Electronics is not listed in the Make list, it may be necessary to restart
CUPS and begin the process to add the printer again.
CUPS and begin the process to add the printer again.
9
a. Select HDP5000 (en) from the Model list.
b. Click
Add Printer.
HDP5000 Cups (Linux & MAC OS) User Guide Rev1.1
29