FANUC Robotics America GFK-1541B ユーザーズマニュアル

 The IC693CMM321Ethernet Interface mounts in a Series 90-30 PLC baseplate.  It connects to an
Ethernet network either directly through its 10Base-T port (10Base-T Type only), or through its
AAUI port, which requires a user-provided transceiver and cable.  If using the AAUI port, you
may order a transceiver from GE Fanuc (see Appendix B for information) or supply your own
equivalent transceiver. .

CMM321 versions EF or earlier do not have a 10Base T port.

Default Station

Address Label

(Internal)

Serial Number

Label (Internal)

This module has several user-accessible features:

ƒ 

Four LEDs are located at the top of the board.

ƒ 

The Restart pushbutton is located immediately below the LEDs.

ƒ 

The Station Manager port (RS-232 serial port with an RJ-11 connector) is located on the front
of the module.

ƒ 

The 10Base-T Ethernet port (RJ-45 connector) is located on the front of the module.  It does
not require an external transceiver.

ƒ 

The AAUI port (14-pin AAUI connector) is accessible through an opening in the bottom of
the module.  It requires an external transceiver.

ƒ 

The Default Station Address label lists the MAC address to be used by this Interface.  It is
located by removing the module’s front cover and looking on the circuit board.

ƒ 

The module’s serial number is on the silver label on the left side of the module.

www.cadfamily.com    EMail:cadserv21@hotmail.com
The document is for study only,if tort to your rights,please inform us,we will delete