Carrier Access Network Device Axxius 800 ユーザーズマニュアル
Axxius 800 - Release 2.2
5-137
CLI Commands
set
set (router) syslog
Use the set (router) syslog commands to configure the Router to send alarm and event
messages to a Syslog server.
messages to a Syslog server.
set (router) syslog enable/disable
Use the set (router) syslog enable/disable command to enable and disable sending alarm
and event messages to an external Syslog server from the Router.
and event messages to an external Syslog server from the Router.
Syntax:
set {rtr-addr} syslog {disable|enable}
Example:
set 3 syslog enable
The example will enable alarms and event messages to the external Syslog
server, on the Router card in slot 3.
server, on the Router card in slot 3.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{disable|enable}
set (router) syslog facility
Use the set (router) syslog facility command to set the Syslog facility value that the Router
card will report to a syslog server in each message.
card will report to a syslog server in each message.
Syntax:
set {rtr_card-addr} syslog facility {value}
Example:
set 3 syslog facility 16
The example will set the Syslog facility value to 16, on the Router in slot 3.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{value}
The range of valid facility values is from 0 to 23, with a default of 16 (local use 0).
disable
Disable Syslog protocol
enable
Enable Syslog protocol