Carrier Access Network Device Axxius 800 ユーザーズマニュアル
7-12
Axxius 800 - Release 2.2
DS3 Controller Card
Built-In Card Handles
Built-In Card Handles
The Controller card is designed with a handle built into the faceplate to assist in the
removal of the card from the chassis. This handle slides out away from the unit,
creating a handle for a more effective grip.
removal of the card from the chassis. This handle slides out away from the unit,
creating a handle for a more effective grip.
LEDs
The DS3 Controller has a set of six LEDs. The table below describes each LED.
LED
State
Description
STAT
Green
Active
Red
Failed
Flashing Red
System Reset
Yellow
Hot Standby
Flashing Yellow
Cold Standby
Alternating
Red/Yellow
Red/Yellow
Application Loading
LINE
STAT
(1-2)
STAT
(1-2)
3-4 are not
used on this
card
used on this
card
Off
NO transport or port shutdown
Green
Good Line
Slow Blink Green
Loopback
Red
LOS
Slow Blink Red
LOF, AIS
Fast Blink Red
Card Failure
Yellow
Standby, when path protection is active
Slow Blink
Yellow
Yellow
RAI, IDLE, or if protection is active
Out-of-Service
Out-of-Service