CamOne FlyFCOIII ユーザーズマニュアル
V.3.03 www.FlyCamOne.com
Preparation
Charge the Camera with the power adaptor or with the USB-lead at your PC
before use! Please note that the menu of the Camera is locked once connected!
before use! Please note that the menu of the Camera is locked once connected!
Remove the protection film in front of the lens. It surface is high glossy when
removed!
Insert a suitable SD-Card (e.g. FCOIII Micro SD Rapid Rush 8GB) into the card
slot of the FCOIII. Use flat item to let it get in to the click. The writing speed should
be minimum 6MB/Sec.!
removed!
Insert a suitable SD-Card (e.g. FCOIII Micro SD Rapid Rush 8GB) into the card
slot of the FCOIII. Use flat item to let it get in to the click. The writing speed should
be minimum 6MB/Sec.!
Connect the screen module to the cam. Remove
the protection foil of the screen (optional). The
screen is matt once the foil is removed!
the protection foil of the screen (optional). The
screen is matt once the foil is removed!
Switch on your FCOIII. The head moves 90° out
of the shell and does a self adjustment. Move the
head with the buttons of the logo. Never turn the
head by hand. It will damage the gear set and
manipulates the adjustment!
of the shell and does a self adjustment. Move the
head with the buttons of the logo. Never turn the
head by hand. It will damage the gear set and
manipulates the adjustment!
If the head will not get into the upright position, or if the head looks side wards,
you can set it by the two trim potis (16 and 17) behind the battery.
you can set it by the two trim potis (16 and 17) behind the battery.
Due to its setup, the Camera is showing the live picture 90° turned. A comfortable
control function will be given, using the FCOIII
Transmission Set.
control function will be given, using the FCOIII
Transmission Set.
Replace the screen by the battery cover plate
with base. Depending on how you are going to
use the Camera, standing on the base or hanging
on it, it is necessary to turn the picture. Press the
with base. Depending on how you are going to
use the Camera, standing on the base or hanging
on it, it is necessary to turn the picture. Press the
button for 1 second . The LCD-screen
shows “Flip” to indicate, the picture is turned.
Recording your first video
After switch on the camera, „VID“ appears on the LCD-Panel. Press the button
Recording your first video
After switch on the camera, „VID“ appears on the LCD-Panel. Press the button
once to get to the sub menu where „REC“ is displayed. Press the
button to start recording, indicated by turning bars in the LDC-Panel. Press the
button to stop the recording and return back to the main menu by pressing
the
button. Press the
button to move through the main menu, up to
„PLY“ in the display. Replace the battery cover again by the screen and press the
button to start the last video. Do so as well with all other modes!
Download the Videos onto the Computer
To enjoy the just recorded video at your PC, select „PC“ at the LCD-Panel first.
Connect the Camera to the USB-Port. The known jingle indicates the known unit.
In common, a new opened window will show the card and its files or your PC