C. Crane VersaCorder Dual Speed Recorder ユーザーズマニュアル

1) Turn the radio volume up to a gentle listening level. If the volume of

the radio is set too loud, the playback sound may be distorted.

2) Put a tape in and select the speed you want to record at.

3) Plug the 1/8” stereo patch cord into your radio LINE OUT or 

headphone jack and the LINE IN of the VersaCorder. You can use
the red plugs of the included patch cord.

4) Press the RECORD and PLAY Buttons at the same time. The red 

light will flash.

Adjust the volume on the VersaCorder to the level you want or turn the
volume off if you wish. 

Note: If the Timer Switch is ON, normal recording won’t work. Make
sure the Timer Switch is OFF. 

The VersaCorder can be used with any radio that has a headphone jack
or LINE OUT. With the VersaCorder you can listen while recording.