Avocent Cyclades-PR4000 ユーザーズマニュアル
62
Chapter 8 - The E1 and T1 Interfaces, With Signaling
Cyclades-PR4000
The CAS Signaling Mode
A typical application that uses CAS Signaling is shown in Figure 8.4.
PC
PC
Integrated
RAS
Remote Users
Analog Line
Analog Line
CAS Line
Application
Server
Router
Telephone
Network
FIGURE 8.4 CAS APPLICATION EXAMPLE
The CAS Signaling Mode does not have a menu equivalent to the CONFIG =>INTERFACE =>T1/E1(ISDN-PRI)
=>ISDN menu described above. Both signaling modes have a mode-specific menu at the channel level, with
different names, but basically the same function. This menu, CONFIG =>INTERFACE =>T1/E1 =>
=>ISDN menu described above. Both signaling modes have a mode-specific menu at the channel level, with
different names, but basically the same function. This menu, CONFIG =>INTERFACE =>T1/E1 =>
<CHANNEL>
=>SIGNALING, will be described in the next section. The Interface Configuration tree for E1/T1 with CAS Signaling
is shown in Figure 8.5
is shown in Figure 8.5