Avocent Access Router Cyclades-PR2000 ユーザーズマニュアル

STEP FOUR
If  PPP Encapsulation is being used, a type of authentication should be chosen.  This is done in the
authentication menu.

Authentication Menu  CONFIG=>INTERFACE=>SWAN=>AUTHENTICATION

Authentication Type

Local uses the list of users defined in CONFIG=> SECURITY=>USERS=>ADD.
Server uses either Radius or Tacacs to authenticate the user.
Remote is when this interface is considered to be the user and the other end of the
connection performs the authentication

Username

Applies when Authentication Type is Remote.  The username the remote device
expects to receive.

Password

Applies when Authentication Type is Remote.  The password the remote device
expects to receive.

Authentication Server Applies when Authentication Type is Server.  Indicates that either a Radius or Tacacs

server is used for validation.  The location and other parameters of the server must be
configured in CONFIG=> SECURITY.  See section 4.3 of the CyROS Reference
Guide.

Authentication
Protocol

Applies when 

Authentication Type is Local or Server.  Either PAP or CHAP or both can

be used for authentication.

STEP FIVE
The parameters defined in the Routing Protocol and Traffic Control Menus should be set after reading chapters
9 and 12, respectively.  It is probably best to complete the basic configuration of all router interfaces, then
return to the routing protocol and traffic control menus after  general routing and traffic control strategies have
been defined.