Avid Technology Car Video System PT ユーザーズマニュアル

2  

If needed, re-size the bin window so that you 

can see the Start column of the bin window.

3  

In the Start column for the sequence for 

which you want to set a new start time, type the 
new start time using semi-colons (for Drop 
Frame) or colons (for Non-Drop Frame), and 
press Enter.

4  

Click OK to confirm.

Compensating for Different Sequence 
Start Times in Pro Tools and a Video 
Satellite

You can compensate for any offsets that might 
occur if the start times of an Avid sequence dif-
fer between Media Station|PT and Pro Tools.

To set the Video Satellite Offset:

1  

In Pro Tools, choose Setup > Session.

2  

In the Video Satellite Offset field, compensate 

for the offset between the Pro Tools and video 
satellite as follows:

• If the start time of the video satellite se-

quence falls before the start time of the 
Pro Tools sequence, type a positive time 
code value.

• If the start time of the video satellite se-

quence falls after the start time of the 
Pro Tools sequence, type a negative time 
code value.

Compensating for Monitor-
Induced Output Delay

Many monitors add a delay to the video output 
of one or more frames. You can compensate for 
this delay by advancing the video output by the 
necessary number of frames.

To set the number of frames to offset video output:

1  

Choose Setup > Set Video Sync Offset.

2  

In the Satellite field, type the number of 

frames by which you want to offset video satel-
lite playback.

3  

Click OK.

Linking or Unlinking Pro Tools 
and a Video Satellite

After you have connected Pro Tools and a video 
satellite to each other, Link buttons appear in 
the Pro Tools and Media Station|PT transports. 

The Link buttons let you use Pro Tools or 
Media Station|PT to temporarily “lock” the two 
applications to each other. Most playback or 
capturing actions performed on one system are 
automatically duplicated on the other.

Start

column