Audio Power DSP System Multiface ユーザーズマニュアル

 

 
84                            

User's Guide HDSP System Multiface II

 © RME

 

 

35.2 Connector Pinouts 

 
TRS jacks of analog input / output 
 
The stereo ¼" TRS jacks of the analog inputs and outputs are wired according to international 
standards: 
 
Tip = + (hot) 
Ring = – (cold) 
Sleeve = GND 
 
The servo balanced input and output circuitry allows to use monaural TS jacks (unbalanced) 
with no loss in level. This is the same as when using a TRS-jack with ring connected to ground. 
 
 
TRS Phones jack 
 
The analog monitor output on the 
front is accessible through a stereo 
¼" TRS jack. This allows a direct 
connection of headphones. In case 
the output should operate as Line 
output, an adapter TRS plug to RCA 
phono plugs, or TRS plug to TS plugs 
is required. 
 
The pin assignment follows interna-
tional standards. The left channel is 
connected to the tip, the right channel 
to the ring of the TRS jack/plug.