Atlantis Land A02-IPCAM4-W54 ユーザーズマニュアル

ページ / 85
                                                  
                           NetCamera NVW 
                                     A02-IPCAM4-W54                                                  37 
connected in this box.  This default setting will let the camera connect to 
ANY access point under the infrastructure network mode. 
• 
Ad-Hoc Type: Please select between 802.11g or 802.11b if You are using 
a AD-Hoc network. 
Security Configuration: Wireless network communications can be intercepted 
easily.  This option will help you protect your wireless network. 
• 
Authentication: Open communicates the key across the 
network.  Shared  allows communication only with other devices 
with identical WEP settings. WPA-PSK You have to insert a KEY. 
• 
Encryption Type: This option allows you to configure the setting 
of data encryption.  The WEP/WPA key must be set before the 
data encryption is enforced. 
• 
WEP KEY/WPA-PSK KEY: To enable WEP Encryption, you 
should decide the encryption format first by selecting the ASCII or 
HEX option, and then input the WEP key (in the following Key 
1~4
 box). To enable WPA Encryption, you have to inser directly 
the key (minimum 8 characters). Pre-Shared Key: This is used to 
identify each other in the network.  Enter the name in the Pre-
Shared Key
 box, and this name must match the Pre-Shared Key 
value in the remote device. You can check in the picture an 
example of configuration in WPA-PSK.