Arcam BDP300 ユーザーズマニュアル

VIDEO OUT / AUDIO OUT

VIDEO

Y

Cb/Pb

Cr/Pr

L

USB

R

Use this socket if you are using an AV receiver 

with a coaxial digital input. Connect to the 

digital input using a suitable 75

Ω

 screened cable.

Connect this output to your display 

if the display does not support any 

other connection types.

Insert USB flash memory devices 

here. USB memory can be used 

to save downloaded content. The 

BDP300 can also play certain digital 

files stored on USB memory drives: 

see page E-8.

Connect this output to your display or AV 

receiver if available for the best digital video 

and audio connection: see page E-7 .

Connect this socket to a port on your network 

router using an Ethernet patch cable: see 

page E-9. An internet connection enables 

interactive content for BD-Live discs. For 

setup details, see ‘Network’ on page E-21.

Connect these to your amplifier’s CD (or other 

line-level) input using suitable high quality 

interconnect cables. Ensure that the left and 

right audio outputs from the BD player are 

connected to the same left and right inputs on 

your amplifier.

If your display does not support 

HDMI but has a component 

input (Y, Pb, Pr), connect it to 

this video output.

Connect the correct 

mains cable here.

Use this socket if you are using an AV 

receiver with an optical digital audio input.

This allows remote-control signals to be received 

by the BDP300 if the remote sensor is covered 

(or otherwise not ‘visible’ to the remote-control: 

see page E-4 for more information.

This connection allows for remote 

control from a third-party home 

automation system or computer: see 

page E-4 for more information.

This socket allows the BDP300 to be switched 

in and out of standby mode by an amplifier 

(or another item of AV equipment) with a 

 function: see page E-4.

Use this analogue output (L, R), 

to provide audio for use in your 

AV receiver’s Zone 2. It can also be 

used to connect a recording device 

or headphone amplifier.