Aprilaire Ventilation Hood 8100 ユーザーズマニュアル

The unit can be mounted on a concrete wall or on a stud wall . The mounting 
bracket is pre-drilled for fastening to standard 16” O .C . or 24” O .C . stud spacing . 
Remove the access panel, EnergyMax Transfer Core, and air filters for installation .
1 .   Remove the access panel, EnergyMax Transfer Core and filters . (See 

figure 4 .)

2 . 

 for Stud Wall: Fasten the supplied mounting bracket to the wall using the 
supplied lag bolts and washers . (See 

figure 5 .)

    for  Concrete  Wall: Fasten the supplied mounting bracket to the wall using 

field supplied concrete anchors and the supplied lag bolts and washers . 

3 .   Insert the supplied hanging pin in the left hole of the mounting bracket and 

secure by inserting the supplied washer and hand tightening with the supplied 
nut . (See 

figure 5 .)

4 .   Insert the supplied hanging pin in the right hole of the mounting bracket . (See 

figure 5 .)

5 .   Fasten the hanging hook bracket to the left side of the unit with the supplied 

10-32 x 3/8” machine screws, using the pre-tapped holes along the side of the 
unit . (See 

figure 6 .) 

6 .   Fasten the supplied hanging hinge bracket to the right side of the unit with 

the supplied 10-32 x 3/8” machine screws, using the pre-tapped holes along 
the side of the unit . (See 

figure 6 .) 

7 .   Pick the unit up and hook the hanging hook bracket on the left hanging pin . 

(See 

figure 7 .) Note: Keep pressure against the unit to prevent it from 

8 .   Push the unit against the bracket, remove the right side pin, align the hanging 

hinge hook with the bracket and reinsert the hanging pin . Secure the pin by 
inserting the supplied washer and tightening the supplied nut . (See 

figure 8 .)

9 .   Securely tighten the nut on the left side of the unit .
10 .  Reinstall the EnergyMax Transfer Core, air filters and access panel .

FILTER

FILTER

ENERGYMAX

TRANSFER CORE

HANGING PIN

MOUNTING BRACKET

LAG BOLT

AND WASHER  

WASHER

THREADED NUT

HANGING PIN

HOOK BRACKET

(hook points out)

HINGE BRACKET

(hinge points out)

MACHINE SCREWS

HINGE BRACKET

MACHINE SCREWS

HOOK BRACKET

RIGHT END

LEFT END

HANGING PIN

MOUNTING BRACKET

WASHER
THREADED NUT

HINGE BRACKET

MOUNTING

BRACKET

HANGING

PIN

HOOK BRACKET

HINGE BRACKET

90-1741

90-1735

90-1734

90-1736

90-1742