American Audio SDJ-1 ユーザーズマニュアル
5. STOPPING PLAYBACK - Figures 7 &
8
8
Stopping playback will not stop the read-
ing mechanism, but merely pause or cue the
track, this function allows the unit to begin play
instantly. There are two ways to stop (pause)
playback:
1) Press the play/pauSe Button (18) dur-
ing playback. This will pause playback at
the exact same point the play/pauSe
But ton (18) was pressed.
ing mechanism, but merely pause or cue the
track, this function allows the unit to begin play
instantly. There are two ways to stop (pause)
playback:
1) Press the play/pauSe Button (18) dur-
ing playback. This will pause playback at
the exact same point the play/pauSe
But ton (18) was pressed.
2) Press the cue Button (19) during play-
back. This will pause playback and return
the track to the last set cue point.
back. This will pause playback and return
the track to the last set cue point.
3. STARTING PLAYBACK - Figure 7
Insert an SD card as described on page 14
(loaDing/ejecting an SD carD). Pressing
the play/pauSe Button (18) with an SD
Card loaded will immediately start playback.
The play (42) indicator will glow as soon as
playback begins. The point at which playback
starts (cue point) will automatically be stored in
the memory as the cue point. The unit will return
to this cue point (the point at which playback
started) when the cue Button (19)
the play/pauSe Button (18) with an SD
Card loaded will immediately start playback.
The play (42) indicator will glow as soon as
playback begins. The point at which playback
starts (cue point) will automatically be stored in
the memory as the cue point. The unit will return
to this cue point (the point at which playback
started) when the cue Button (19)
is pressed
and released.
BASIC OPErATIONS (CONT.)
Figure 7
Figure 8
©
American Audio
®
- www.americanaudio.us - SDJ-1™ Instruction Manual Page 15
4. PAUSING - Figure 7
This function pauses playback at the exact same point the play/pauSe Button (18) was pressed.
Pressing
the play/pauSe Button (18) will switch between play and pause modes. When the unit is in pause mode
the pauSe inDicator (42) in the lcD DiSplay (3) and the green play/pauSe Button (18) L.E.D. will begin
to flash repeatedly.
the pauSe inDicator (42) in the lcD DiSplay (3) and the green play/pauSe Button (18) L.E.D. will begin
to flash repeatedly.
6. AUTO CUE
This function will automatically set a cue point to the first audio source when a SD Card is loaded. The first set
cue point will always be the beginning of track 1. If a new track is selected before the play/pauSe Button
(18) is pressed, a new CUE POINT will be set to reflect the new starting point. To toggle AUTO CUE on and off
hold the Sgl/ctn Button (2) for 2 seconds.
cue point will always be the beginning of track 1. If a new track is selected before the play/pauSe Button
(18) is pressed, a new CUE POINT will be set to reflect the new starting point. To toggle AUTO CUE on and off
hold the Sgl/ctn Button (2) for 2 seconds.