Alienware D01M ユーザーズマニュアル
Front Bezel
129
27
Front Bezel
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the left side-panel. See "Removing the Left Side-Panel" on
2 Open the PCI shroud. See "Opening the PCI Shroud" on page 45.
3 Remove the drive-bay shroud. See "Removing the Drive-Bay Shroud" on
3 Remove the drive-bay shroud. See "Removing the Drive-Bay Shroud" on
4 Remove the right-side top panel. See "Removing the Right-Side Top
5 Remove the right lighting-board. See "Removing the Right Lighting-
6 Remove the right-side middle panel. See "Removing the Right-Side
7 Remove the right-side bottom panel. See "Removing the Right-Side
Removing the Front Bezel
1 Remove the screws that secure the front bezel to the chassis.
2 Note the routing of the front-bezel cables and disconnect the front bezel
2 Note the routing of the front-bezel cables and disconnect the front bezel
cables from the connectors on the master I/O board.
book.book Page 129 Wednesday, May 16, 2012 2:37 PM