Alienware D01M ユーザーズマニュアル

System Setup Utility

Use the system setup to:

• get information about the hardware installed in your computer, such as the 

amount of RAM, the size of the hard drive, and so on

• change the system configuration information
• set or change a user-selectable option, such as the user password, type of 

hard drive installed, enabling or disabling base devices, and so on

Before you change system setup, it is recommended that you note the 

system-setup screen information for future reference.

1 Turn on (or restart) your computer.
2 During POST, when the DELL logo is displayed, watch for the F2 prompt 

to appear and then press <F2> immediately.

The F2 prompt indicates that the keyboard has initialized. This prompt 

can appear very quickly, so you must watch for it, and then press <F2>. If you 

press <F2> before the F2 prompt, this keystroke is lost. If you wait too long and 

the operating system logo appears, continue to wait until you see the 

Microsoft Windows desktop. Then, turn off your computer and try again. See 

The system setup screen displays current or changeable configuration 

information for your computer. Information on the screen is divided into 

three areas: the setup item, active help screen, and key functions.

book.book  Page 145  Wednesday, May 16, 2012  2:37 PM