Alienware D01M ユーザーズマニュアル

System-Board Assembly

4 Route and connect the cables that you disconnected from the system-

board assembly.

For information on system board connectors, see "System-Board 

1 Replace the processor. See "Replacing the Processor" on page 78.
2 Replace the processor liquid-cooling assembly. See "Replacing the 

Processor Liquid-Cooling Assembly" on page 72.

3 Replace the memory module(s). See "Replacing Memory Module(s)" on 

4 Replace the coin-cell battery. See "Replacing the Coin-Cell Battery" on 

5 Replace the PCI-Express x1 card. See "Replacing the PCI-Express x1 Card" 

6 Replace the graphics card. See "Replacing the Graphics Card" on page 58.
7 Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
8 Replace the memory fan. See "Replacing the Memory Fan" on page 68.
9 Replace the left side-panel. See "Replacing the Left Side-Panel" on 

10 Follow the steps in "After Working Inside Your Computer" on page 15.

1 Turn on the computer.
2 Press <F2> during POST to enter the system setup program.
3 Navigate to the main tab and enter the service tag in the Service Tag 

Setting field.

book.book  Page 97  Wednesday, May 16, 2012  2:37 PM