Alfa Romeo 147 オーナーマニュアル
CORRECT USE OF THE CAR
194
The ABS system with
which the car may be fitted
which the car may be fitted
does not control the trailer braking
system. Particular care is therefore
necessary on slippery surfaces.
system. Particular care is therefore
necessary on slippery surfaces.
WARNING
Under no circumstances
should the car brake sys-
should the car brake sys-
tem be altered to control the
trailer brake. The trailer braking
system must be fully independent
of the car’s hydraulic system.
trailer brake. The trailer braking
system must be fully independent
of the car’s hydraulic system.
WARNING
To make sure the maximum towable
weight is not exceeded (given in the log
book) account should be taken of the fully
laden trailer, including accessories and per-
sonal belongings.
book) account should be taken of the fully
laden trailer, including accessories and per-
sonal belongings.
Drive within the specific speed limit in
every country for car trailers. In any case the
maximum speed should never exceed 100
km/h.
maximum speed should never exceed 100
km/h.
INSTALLING
THE TOW HOOK
THE TOW HOOK
The towing device should be fastened to
the body by specialised personnel accord-
ing to the following instructions and any
additional and/or integrative information
supplied by the Manufacturer of the device
itself.
ing to the following instructions and any
additional and/or integrative information
supplied by the Manufacturer of the device
itself.
The towing device must meet current
regulations with reference to Directive
94/20/CEE and subsequent amend-
ments.
94/20/CEE and subsequent amend-
ments.
For any version the towing device used
must match the towable weight of the car
on which it is to be installed.
on which it is to be installed.
For the electric connection a unified con-
nector should be used which is generally
placed on a special bracket normally fas-
tened to the towing device itself.
placed on a special bracket normally fas-
tened to the towing device itself.
For the electric connection a 7 or 13
pole 12VDC connection must be used
(CUNA/UNI and ISO/DIN standards) fol-
lowing any reference instructions given by
the car Manufacturer and/or towing device
Manufacturer.
(CUNA/UNI and ISO/DIN standards) fol-
lowing any reference instructions given by
the car Manufacturer and/or towing device
Manufacturer.
186-196_Alfa147 Q2 GB 4-07-2008 12:03 Pagina 194