Alfa Romeo 159 オーナーマニュアル
77
SAFETY
DEVICES
W
ARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
❒ pressing the brake pedal, pressing the
clutch pedal (in these cases the last
stored speed will stay memorised, to
resume it press button
stored speed will stay memorised, to
resume it press button
RES);
❒ pressing the accelerator pedal; in this
case the system is disengaged only
temporarily; device operation will be
resumed automatically when releas-
ing the pedal;
temporarily; device operation will be
resumed automatically when releas-
ing the pedal;
❒ with car speed below the preset lim-
it (in these cases the last stored
speed will stay memorised, to resume
it press button
speed will stay memorised, to resume
it press button
RES);
Automatic Cruise Control
deactivation
deactivation
The Cruise Control is temporarily deac-
tivated when the ABS or VDC systems
come into operation (above a max. pre-
set time): in this case the last set speed
will stay memorised, to recall it press
button
tivated when the ABS or VDC systems
come into operation (above a max. pre-
set time): in this case the last set speed
will stay memorised, to recall it press
button
RES.
In the event of Cruise Control or engine
control system failure, the device is de-
activated until removing the electronic
key from the ignition device. In this
event contact Alfa Romeo Authorized
Services.
control system failure, the device is de-
activated until removing the electronic
key from the ignition device. In this
event contact Alfa Romeo Authorized
Services.
TO RESET THE
MEMORISED SPEED
MEMORISED SPEED
If the device has been disengaged for
example pressing the brake or clutch
pedal, the memorised speed can be re-
set as follows:
❒ accelerate gradually until reaching a
example pressing the brake or clutch
pedal, the memorised speed can be re-
set as follows:
❒ accelerate gradually until reaching a
speed approaching the one memo-
rised;
rised;
❒ engage the gear selected at the time
of speed memorising (4th or 5th
gear);
gear);
❒ press the RES button (set at stalk
end).
TO INCREASE THE
MEMORISED SPEED
MEMORISED SPEED
The speed memorised can be increased
in two ways:
❒ pressing the accelerator and then
in two ways:
❒ pressing the accelerator and then
memorising the new speed reached;
or
❒ moving the stalk upwards (+).
Each operation of the stalk will corre-
spond to a slight increase in speed
(about 1.5 km/h), while keeping the
stalk upwards will correspond to a con-
tinuous speed increase.
❒ moving the stalk upwards (+).
Each operation of the stalk will corre-
spond to a slight increase in speed
(about 1.5 km/h), while keeping the
stalk upwards will correspond to a con-
tinuous speed increase.
TO REDUCE MEMORISED
SPEED
SPEED
The speed memorised can be increased
in two ways:
❒ disengaging the device and then
in two ways:
❒ disengaging the device and then
memorising the new speed;
or
❒ moving the stalk downwards (–) un-
❒ moving the stalk downwards (–) un-
til reaching the new speed which will
be memorised automatically.
be memorised automatically.
Each operation of the stalk will corre-
spond to a slight decrease in speed
(about 1.5 km/h), while keeping the
stalk downwards will correspond to a
continuous speed decrease.
spond to a slight decrease in speed
(about 1.5 km/h), while keeping the
stalk downwards will correspond to a
continuous speed decrease.
DEVICE DISENGAGEMENT
The device is disengaged in one of the
following cases:
❒ turning the knurled ring A-fig. 57
following cases:
❒ turning the knurled ring A-fig. 57
to
O;
❒ turning the engine off or removing
the electronic key from the ignition
device;
device;
046-082 Alfa 159 GB 8-04-2009 14:23 Pagina 77