Agilent Technologies Printer Accessories 1670G ユーザーズマニュアル
<msus>
Mass Storage Unit specifier.
INTernal0
for the hard disk drive and
INTernal1
for the flexible disk drive.
<new name>
A string of up to 10 alphanumeric characters for LIF in the following form:
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN
Example
OUTPUT XXX;":MMEMORY:RENAME ’OLDFILE’,’NEWFILE’"
OUTPUT XXX;":MMEM:REN ’OLDFILE’[,INTERNAL1],’NEWFILE’"
STORe[:CONFig]
Command
:MMEMory:STORe [:CONfig]<name>[,<msus>],
<description>[,<module>]
<description>[,<module>]
The STORe command stores configurations onto a disk. The [:CONFig]
specifier is optional and has no effect on the command. The
specifier is optional and has no effect on the command. The
<name>
parameter specifies the file on the disk. The
<description>
parameter
describes the contents of the file. The optional
<module>
parameter allows
you to store the configuration for either the system or the logic analyzer. 1
refers to the logic analyzer, and 0 refers to the system.
refers to the logic analyzer, and 0 refers to the system.
If the optional
<module>
parameter is not specified, the configurations for
both the system and the logic analyzer are stored.
<name>
A string of up to 10 alphanumeric characters for LIF in the following form:
NNNNNNNNNN
or
A string of up to 12 alphanumeric characters for DOS in the following form:
A string of up to 12 alphanumeric characters for DOS in the following form:
NNNNNNNN.NNN
<msus>
Mass Storage Unit specifier.
INTernal0
for the hard disk drive and
INTernal1
for the flexible disk drive.
<description>
A string of up to 32 alphanumeric characters
<module>
An integer, 0 through 1
MMEMory Subsystem
STORe[:CONFig]
STORe[:CONFig]
12–20