Agilent Technologies Printer Accessories 1670G ユーザーズマニュアル

Query

:MACHine{1|2}:STRigger:SEQuence?

The SEQuence query returns the current sequence specification.

Returned Format

[:MACHine{1|2}:STRigger:SEQuence] <number_of_levels>,

 <level_of_trigger><NL>

OUTPUT XXX;":MACHINE1:STRIGGER:SEQUENCE?"

STORe

Command

:MACHine{1|2}:STRigger:STORe<N> <store_qualifier>

The STORe command defines the store qualifier for a given sequence level.
Any data matching the STORe qualifier  will actually be stored in memory as
part of the current trace data.  The qualifier may be a single term or a
complex expression.  The terms A through J are defined by the TERM
command.  The meaning of 

IN_RANGE1

 and 

2

 and 

OUT_RANGE1

 and 

2

 is

determined by the RANGe command.

Expressions are limited to what you could manually enter through the State
Trigger menu.  Regarding parentheses, the syntax definitions below show
only the required ones.  Additional parentheses are allowed as long as the
meaning of the expression is not changed.

A detailed example is provided in figure 16-2 on page 16-11.

<N>

an integer from 1 to the number of existing sequence levels (maximum 12)

<store_

qualifier>

<qualifier>

 see "Qualifier" on page 16-7

OUTPUT XXX;":MACHINE1:STRIGGER:STORE1 ’ANYSTATE’"

OUTPUT XXX;":MACHINE1:STRIGGER:STORE2 ’OUT_RANGE1’"

OUTPUT XXX;":MACHINE1:STRIGGER:STORE3 ’(NOTC AND NOTD AND

NOTI)’"

STRigger (STRace) Subsystem

16–17