AeroComm SPH Series ユーザーズマニュアル

The MLS-800 is a microprocessor controlled 

Ground Station Simulator designed to 

operate from a bench test environment. 

Test parameters are selected via a 44-position 

keyboard and displayed on test 

operational menus.

The RD-301A X-Band Weather Radar 

tester provides additional enhanced functions 

and capabilities to meet and satisfy simula-

tion requirements of non-coherent Weather 

RADAR systems. These low power, 

narrowband, turbulence processing RA-

DARS demand optimum performance 

of the magnetron pulse. The RD-301A 

provides the technician with the tools he 

needs to ensure correct alignment and 

operation.

The ATC-1400A Transponder/DME Bench 

Tester provides complete testing capability of 

modern ATC transponders and DME equipment. 

When used in conjunction with the T-1401, 

I-1402, S-1403 or SI-1404; the testing capability 

of the ATC-1400A can be expanded for TACAN, 

Mode 4/IFF or Mode S transponders... making it the 

most versatile pulse RF source in the avionics test 

equipment industry.

The T-1401 provides a user friendly test 

solution for TACAN receiver/transmitters.

The I-1402 provides a friendly test solution for 

MK10A and MK12 IFF transponders and

interrogators.

The S-1403DL/MLD provides a complete 

test solution for Mode S and Mode S 

“Datalink” capable transponders.

SI-1404 provides a comprehensive 

3rd Line/Depot Level test solution 

for next generation MK12/Mode S IFF 

transponders.

The DPS-350 Air Data Tester is a micropro-

cessor based unit using the latest in transduc-

er technology. It operates similar to Barfield’s 

1811 series testers, but the transducer 

technology used is virtually immune to 

the costly repairs generally experienced by 

analog instruments.

The 1811D is an inexpensive, portable field tester ideal 

for leak testing aircraft pitot and static systems or on-board 

testing of altimeters and airspeed indicators. It is config-

ured with hand pumps and external pressure ports for 

supplying the necessary pressure and vacuum (no external 

power required) needed for on-board testing. This pitot/static 

tester is very practical for new facilities or those with a lim-

ited budget.

The aviation industry has an enormous need for 

more reliable and cost effective tools for perform-

ing standard pitot/static system leak tests. The 

DALT55 Digital Altimeter and the DAS650 Digi-

tal Airspeed indicator were designed to be a direct 

replacement to the current analog instruments. The 

DALT55 & DAS650 use state-of-the-art 

transducer technology for pressure measurements, 

making them virtually immune to the frequent 

and costly repairs generally associated with ana-

log instruments.

The TT1200A is specifically designed to accomplish all 

requirements for testing the aircraft Chromel-Alumel (K 

type) turbine temperature measuring systems. The tester can 

measure resistances down to 0.001 Ω, measure insulation 

up to 200 MΩ, perform indicator runouts with a resolution of 

.1ºC or 1ºC and a range of 1372ºC, and can also display the 

equivalent ºF or millivoltages and may be used as a master 

indicator as well.

The SC063 is used to check the mounted aircraft

 compass. It is unique in that the compensating 

magnets have been removed and a combination 

magnifying lens and collimating sight added. 

The compass indicates magnetic direction at

all times and is not subject to calibration

offsets. Accurate to ±1º. Includes monopod and 

protective carrying case. 

Calibration  Card Included.

This megohmmeter is designed to check the insula-

tion breakdown in a variety of applications requiring a 

high voltage but low current. 

Selectable test voltages: 

45, 100, 200 and 500 VDC. Meter range: 0.5 to 

1000MΩ.

The 2311FA tests aircraft pressure systems 

for both reciprocating and turbine engine 

pressure systems. It provides pressure for 

testing pressure transmitters, warning 

switches pressure-type torque (BMEP) 

indicators and system leak testing in the 

range of 0-600 PSI. Two types of gauges 

are recommended and are available for 

standard or inspector accuracy requirements.

The 1811GA/HA testers are portable, self-contained units, 

used for testing and calibrating aircraft pitot/static systems. 

This tester uses three analog instruments (Altimeter, 

Vertical Speed and Airspeed) with the appropriate

correction cards to perform aircraft leak tests or instru-

ment calibrations. It is configured with hand pumps only 

(1811GA) or hand pumps and AC power (1811HA) capabil-

ity. Either model can be fitted with the digital instru-

ments below for increased accuracy & reliability.