Advantek Networks AWN-USB-54S ユーザーズマニュアル

stations. If there are only 802.11b wireless stations in the network, you can set the card

to this mode.

802.11 B/G mix

– If you have a mix of 802.11b and 802.11g wireless stations in your

network, it is recommended to setting the card to this mode. This mode is also the default

setting.

802.11 G only

–This card can be compatible with both 802.11g and 802.11b wireless

stations. If there are only 802.11g wireless stations in the network, you can set the card

to this mode.

Preamble: The preamble defines the length of the CRC block for communication among

wireless devices.

This option is only active in the Ad Hoc network

. There are two modes

including Auto, Long and Short Preamble. If “Auto” mode is selected, the adapter will auto

switch the preamble mode depending on the wireless devices is connecting to.

RTS Threshold: Minimum packet size required for an RTS (Request To Send). For packets

smaller than this threshold, an RTS is not sent and the packet is transmitted directly to the

wireless network. Select a setting within a range of 0 to 2347 bytes. Minor change is

recommended.

Fragment Threshold: The value defines the maximum size of packets; any packet size larger

than value will be fragmented. If you have decreased this value and experience high packet

error rates, you can increase it again, but it will likely decrease overall network performance.

Select a setting within a range of 256 to 2346 bytes. Minor change is recommended.

Channel: This setting is only available for Ad Hoc mode. Select the number of the radio

channel used for the networking. The channel setting should be the same with the network you

are connecting to.