Dynex DX-G1113 ユーザーズマニュアル
Installing your car stereo
25
Chevrolet
Astro 1996-2004
GMC
Safari 1996-2004
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Set the gear selector into its lowest position.
3 Unclip the perimeter of the dash trim bezel.
4 Disconnect the rear A/C control harness and headlight switch from the back of the
2 Set the gear selector into its lowest position.
3 Unclip the perimeter of the dash trim bezel.
4 Disconnect the rear A/C control harness and headlight switch from the back of the
dash trim bezel, then remove the bezel.
5 Using a flat-blade screwdriver, press down of the outside clips of the factory head unit,
then remove the head unit.
6 Locate bracket set 8.
7 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 25 Wednesday, August 16, 2006 3:38 PM