Dynex DX-G1113 ユーザーズマニュアル
70
Installing your car stereo
Pontiac
Grand Prix 1985-1987
Bonneville 1982-1986
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the three screws from the top edge of the dash trim bezel.
2 Remove the three screws from the top edge of the dash trim bezel.
3 Remove the four screws from the metal steering column trim, then remove the trim.
4 Remove the four screws exposed at the bottom edge of the dash trim bezel.
5 Remove the cigarette lighter and retainer ring, then remove the dash trim bezel.
6 Remove the hardware that secures the factory mounting brackets to the factory head
4 Remove the four screws exposed at the bottom edge of the dash trim bezel.
5 Remove the cigarette lighter and retainer ring, then remove the dash trim bezel.
6 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
7 Go to “Completing the installation” on page 76.
2
S10 shown
as example
as example
DX-G1113.fm Page 70 Wednesday, August 16, 2006 3:38 PM