Dixon Aficio 1515 ユーザーズマニュアル
Appendix
86
9
❖
❖
❖
❖ Access control initialization
msh> access flush
Note
❒ This restores the factory default
so all access ranges become
“0.0.0.0”.
“0.0.0.0”.
DHCP
Use the “dhcp” command to config-
ure the DHCP settings.
ure the DHCP settings.
❖
❖
❖
❖ Reference
The following command displays
the current DHCP settings.
the current DHCP settings.
msh> dhcp
❖
❖
❖
❖ Configuration
You can configure the DHCP set-
tings.
tings.
msh> dhcp interface_name
[on|off]
[on|off]
Note
❒ Select [on] to enable DHCP. Se-
lect [off] to disable DHCP.
❖
❖
❖
❖ Interface Priority Configuration
You can assign priorities govern-
ing which interface obtains DHCP
parameters.
ing which interface obtains DHCP
parameters.
msh> dchp priority
interface_name
interface_name
Note
❒ Priority assignment is useful when
connecting more than one inter-
face to the machine.
face to the machine.
❒ If an interface is not selected, it ap-
pears according to the currently set
priority regardless of multiple in-
terface connections.
priority regardless of multiple in-
terface connections.
*1
Available when the optional 802.11b
interface unit is installed.
*2
Available when the optional 1394 in-
terface board is installed.
Protocol
Use the “set” command to allow or
prevent remote access for each proto-
col.
prevent remote access for each proto-
col.
msh> set protocol {up | down}
*1
Available when the 1394 interface
board is installed.
Interface name
Interface to be configured
ether
Ethernet interface
IEEE 802.11b interface
IEEE 1394 interface
Protocol
tcpip
appletalk
netware
smb
scsiprint
lpr
ftp
rsh
diprint
web
web
snmp
ipp
http
“up” means active and
“down” means inactive.
“down” means inactive.