DKS Enterprises 9210 ユーザーズマニュアル
SECTION 4 – OPERATING INSTRUCTIONS
WARNING - To reduce the risk of injury or death:
1.
READ AND FOLLOW ALL INSTRUCTIONS.
2.
Never let children operate or play with gate controls. Keep the remote control away
from children.
from children.
3.
Always keep people and objects away from gate. NO ONE SHOULD CROSS THE
PATH OF THE MOVING GATE
PATH OF THE MOVING GATE
4.
Test the operator monthly. The gate MUST reverse on contact with a rigid object or
stop or reverse when an object activates the non-contact sensors. After adjusting the
force or the limit of travel, retest the gate operator. Failure to adjust and retest the
gate operator properly can increase the risk of injury or death.
stop or reverse when an object activates the non-contact sensors. After adjusting the
force or the limit of travel, retest the gate operator. Failure to adjust and retest the
gate operator properly can increase the risk of injury or death.
5.
Use the emergency release only when the gate is not moving and power has been
shut-off.
shut-off.
6.
KEEP GATES PROPERLY MAINTAINED. Read the owner's manual. Have a
qualified service person make repairs to gate hardware.
qualified service person make repairs to gate hardware.
7.
The entrance is for vehicles only. Pedestrians must use separate entrance.
8.
SAVE THESE INSTRUCTIONS.
4.1
Power and Reset Switches
Open the power switch cover located on the side of the operator to access the MAIN POWER switch
and the operator RESET switch.
and the operator RESET switch.
OFF
AC
POWER
RESET
The RESET switch is used to turn off the
entrapment alarm and to reset the operator after
a hard shutdown has occurred.
entrapment alarm and to reset the operator after
a hard shutdown has occurred.
The AC POWER toggle switch turns power to
the operator ON (toggle up) or OFF (toggle
down).
the operator ON (toggle up) or OFF (toggle
down).
9210-065-H-8-08
Page
41