Digital Media Switch MPS409 ユーザーズマニュアル

 

2

Single switcher mode emulates one switcher with 9 inputs (9x1). Only one input 
can be selected at a time, indicated by a single lit LED on the front panel input 
selections. The selected video input will output on the associated group output 
only while the audio is output on the group output and Program Audio Output.

To enable single switcher mode:
Press and hold the Mode button (VGA/YUV Input #1) for three seconds, then press 
and release the Single button (VGA/YUV Input #2). The associated LED indicates 
if single switcher mode is on (when lit) or off. When the Mode button is released, 
the LED resumes input indication. 
In the example below, HDMI input #2 is selected. Only the HDMI output is active. 
HDMI audio, indicated by the flashing LED, is routed to both the group output and 
Program Audio Output.

Single Switcher Mode

Separate switcher mode allows the four groups of inputs (DVI, HDMI, VGA, and 
composite video) to be used individually. Each group has an independent output 
creating four independent switchers. Up to four inputs can be selected at one 
time, one in each group, indicated by four lit LEDs. The audio and video of the 
selected input group outputs only on the associated group output. Audio from the 
last input selection also goes to the Program Audio Output. Of the four selected 
inputs, the audio input routed to the Program Audio Output is indicated by the 
blinking input LED.

Press and hold the Mode button (VGA/YUV Input #1) for three seconds, then press 
and release the Separate (DVI input #1) button. The associated LED indicates if 
separate switcher mode is on (when lit) or off. When the Mode button is released, 
the LED resumes input indication.
In the example below, VGA/YUV input #2, DVI input #1, HDMI input #3 and 
Video input #2 are selected. All four group outputs are active with their respective 
AV input signals on them. The audio of DVI input #1 is also routed to the Program 
Audio Output, indicated by the flashing LED.

Separate Switcher Mode

Combined mode allows the MPS 409 to function as a 5x1 HDMI/DVI switcher. 
This is accomplished by switching a selected DVI or HDMI input to the HDMI video 
output, deactivating the video output. 
In single-combine mode, the front panel input selection LEDs operate the same 
as when in single switcher mode (a single lit LED indicates the current input 
selection). 

Press and release
Single Mode

Single Switcher Mode

Press and Hold

for three seconds

Enable Separate Switcher Mode

Press and release
Separate Mode

Press and Hold

for three seconds

The MPS switcher can be connected to as many as nine input devices simultaneously and operate in one of four switching modes: 
single (the default), separate, single combined, or separate combined. To view the current mode, press and hold the Mode button 
(VGA/YUV input #1). The associated mode LEDs (single, separate, single+combined, or separate+combined) will light.