DeWALT 31-735 取り扱いマニュアル

10

The belt/disc sander is heavy. Use two or more people to lift the unit to the top of the cabinet.

1.  Place the sanding unit on top of the cabinet.

NOTE:  Insert the sander drive belt through the hole (A) 
FIG. 11.

2.  Place a 5/16" lock washer on a 5/16-18 x 1/2" hex 

head screw. From inside the cabinet, insert the screw 
through one of the holes (B) Fig. 11, and into the 
threaded hole in the sanding unit. Tighten the screw 
securely.

3.  Repeat this process for the three remaining holes (B) 

Fig. 11.

4.  Place a #10 washer on a #10-32 x 3/4" button-head 

screw. From the inside of the cabinet, insert the screw 
through one of the holes (C) Fig. 11 in the dust baffle 
and cabinet and into the threaded hole in the sanding 
unit. Tighten the screw securely.

5.  Repeat for the three remaining holes.

1.  Place a hose clamp (A) Fig. 12 on each end of hose 

(B).

2.  Slide one end of hose (B) Fig. 13 over the hose port 

(C) on the dust baffle inside the cabinet. Secure it 
with the hose clamp.

3.  Slide the other end of the hose over the fan intake 

port (F) Fig. 14 inside the cabinet. Secure it with the 
hose clamp.