Delta Tau COMPACT UMAC ユーザーズマニュアル
UMAC-CPCI Turbo CPU Board Hardware Reference Manual
E3: Re-Initialization on Reset Control
E Point and
Physical Layout
Location Description
Default
Remove jumper for normal reset mode (default).
Jump pins 1 to 2 for re-initialization on reset.
Jump pins 1 to 2 for re-initialization on reset.
No jumper installed
E4: (Reserved for Future Use)
E Point and
Physical Layout
Location Description
Default
No jumper installed
E5: USB/Ethernet Communication Jumper
E Point and
Physical Layout
Location Description
Default
Jump 1-2 for CPCI Host Bridge card
Jump 2-3 for Ethernet or USB communications from J7 (Ethernet
connector) or J3 (USB connector).
Jump 2-3 for Ethernet or USB communications from J7 (Ethernet
connector) or J3 (USB connector).
Pins 2-3 jumpered
E11: Power Supply Check Control
E Point &
Physical Layout
Location Description
Default
E11:
Jump E11 pin 1 to 2 to include the +12V and –12V analog
supplies from the J1 backplane connector in the power-supply
check circuit, inhibiting outputs if these supplies fail.
Remove E11 jumper so only 5V digital supply is used in power-
supply check circuit.
supplies from the J1 backplane connector in the power-supply
check circuit, inhibiting outputs if these supplies fail.
Remove E11 jumper so only 5V digital supply is used in power-
supply check circuit.
No jumper installed
E17 – E18: Serial Port Select
E Point and
Physical Layout
Location Description
Default
E17:
Jump E17 pin 1 to 2 to select RS-232 serial data input for main
serial port (J4 front-panel or J2 backside connector).
Jump E17 pin 2 to 3 to select RS-422 serial data input for main
serial port (J4 front-panel or J2 backside connector).
serial port (J4 front-panel or J2 backside connector).
Jump E17 pin 2 to 3 to select RS-422 serial data input for main
serial port (J4 front-panel or J2 backside connector).
Pins 1-2 jumpered
E18:
Jump E18 pin 1 to 2 to disable Phase/Servo Clock on J2
Jump E18 pin 2 to 3 to enable Phase/Servo Clock on J2
Jump E18 pin 2 to 3 to enable Phase/Servo Clock on J2
Pins 1-2 jumpered
12
Jumper Descriptions