DAXTEN RACKACCESS 8I ユーザーズマニュアル

 

 

 

 
The SCOUTutp provides two possibilities to select the desired computer.  You may use either the 
keyboard Hot Key commands or take advantage of the OSD (On-Screen-Display). 
You may notice that the mouse cannot be used for around 1 second when the SCOUTutp switches to 
another computer. This is normal and is caused by the synchronization process which ensures that 
the mouse operates correctly. 
 

To send Hot Key commands to the SCOUTutp switch, press and release the  Ctrl   key twice within 2 
seconds. Press a command key for the desired effect. The following commands are supported: 
 

Port number 

Switches to the desired PC 

 
In Auto-Scan mode, the image shown on the monitor will automatically switch to the next computer. 
The delay is user definable 
 

blue 

grey 

grey 

blue 

blue 

grey 

grey 

blue 

To access the OSD, press the Hot Key twice 
and the OSD window appears: 
 
Lines with blue text show active computers, lines 
with grey text show inactive computers. 
 
To navigate up and down use the UP and 
DOWN arrow keys. 
 
To jump from one column to another (in 
Settings) use the  Tab  key. 
 
 
After you have selected a computer press  Enter  . A confirmation label appears showing which 
computer you accessed. To exit the OSD or return to a previous window within the OSD press  ESC  . 
Note

: When you use the OSD you can’t use the keyboard Hot Keys at the same time. 

 

General 
Ports 
Time 
Users 
Security 

Press F2   and the setting window will appear.  
When the OSD is password protected only the administrator has access to this 
window. 
 
 
 
 

 

RackAccess i Series 

8

 

User Guide