Davis 6322 ユーザーズマニュアル

Preparing the ISS for Installation

2

Note: 

If the ISS is a Plus model and contains UV and solar sensors, do not touch the small white diffusers 
on top of the sensors. Oil from skin reduces their sensitivity. If you are concerned that you have 
touched the diffusers at any time during the installation, clean the UV diffuser using ethyl alcohol 
with a soft cloth. When cleaning the UV diffuser, DO NOT use rubbing or denatured alcohols 
because they can affect accuracy of the sensor readings. Ethyl alcohol can be procured through an 
industrial or laboratory supply store. Clean the solar diffuser with a soft damp cloth.

The following hardware is included with the ISS and weather station assembly. Some of 
the hardware is optional based on how the ISS is assembled and installed. (See “Installing 
the ISS” on page 19 for more information.)

Note: 

If any of the hardware components are missing or not included, contact Customer Service toll free 
at 1-800-678-3669 about receiving replacement hardware or other components. 

The following are additional tools required to set up and install the ISS:

• Small Phillips head screwdriver 
• Scissors or wire-cutters
• Adjustable wrench or 7/16" wrench
• Compass or local area map
• Ballpoint pen or paper clip (or other small pointed object)
• Drill and 3/16" (5 mm) drill bit (if mounting on a vertical surface)

Please follow the steps in the order they are presented. Each step builds on tasks 
completed in previous steps. 

Note: 

Using a well-lit work table or work area to prepare the ISS for installation is recommended.

07395.249 Manual ISS Installation_RevE_Final_Print.pdf   4

4/7/2008   1:44:48 PM