BMW 2011 328i Coupe オーナーマニュアル
163
Towing methods
Do not lift the vehicle by a tow fitting or
body and chassis parts; otherwise, dam-
body and chassis parts; otherwise, dam-
age may result.
<
With a tow bar
The towing vehicle must not be lighter
than the towed vehicle; otherwise, it may
than the towed vehicle; otherwise, it may
be impossible to maintain control.
<
The tow fittings used should be on the same
side on both vehicles. Should it prove impossi-
ble to avoid mounting the tow bar at an angle,
please observe the following:
side on both vehicles. Should it prove impossi-
ble to avoid mounting the tow bar at an angle,
please observe the following:
>
Clearance and maneuvering capability will
be sharply limited during cornering.
be sharply limited during cornering.
>
The tow bar will generate lateral forces if it is
attached offset.
attached offset.
Attach the tow bar to the tow fittings only,
as attaching it to other parts of the vehicle
as attaching it to other parts of the vehicle
could result in damage.
<
With a tow rope
When starting off in the towing vehicle, make
sure that the tow rope is taut.
sure that the tow rope is taut.
To avoid jerking and the associated
stresses on vehicle components when
stresses on vehicle components when
towing, always use nylon ropes or nylon straps.
Attach the tow rope to the tow fittings only, as
attaching it to other parts of the vehicle could
result in damage.
Attach the tow rope to the tow fittings only, as
attaching it to other parts of the vehicle could
result in damage.
<
With a tow truck: vehicle without xDrive
Manual and automatic transmission:
Sports automatic transmission with
double clutch:
double clutch:
Have the BMW transported with a tow truck
with a so-called lift bar, or on a flatbed.
Do not tow the vehicle with just the rear axle
raised as this may cause the steering to turn.
with a so-called lift bar, or on a flatbed.
Do not tow the vehicle with just the rear axle
raised as this may cause the steering to turn.
With a tow truck: vehicle with xDrive
Do not tow a BMW with xDrive with just
the front or rear axle raised; otherwise, the
the front or rear axle raised; otherwise, the
wheels could lock up and the transfer case
could be damaged.
could be damaged.
<
Have the BMW transported on a flatbed surface
only.
only.
Tow-starting
Avoid tow-starting the vehicle whenever possi-
ble; instead, jump-start the engine, refer to
page
ble; instead, jump-start the engine, refer to
page
Vehicles with a catalytic converter
should only be tow-started when the engine is
cold; vehicles with an automatic transmission or
Sports automatic transmission with double
clutch cannot be tow-started at all.
cold; vehicles with an automatic transmission or
Sports automatic transmission with double
clutch cannot be tow-started at all.
1.
Switch on hazard warning flashers, comply
with local regulations.
with local regulations.
2.
Switch on the ignition, refer to page
3.
Shift into 3rd gear.
4.
Have the vehicle tow-started with the clutch
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch completely again.
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch completely again.
5.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
bar or rope and switch off the hazard warn-
ing flashers.
6.
Have the vehicle checked.
With xDrive: do not activate Hill Descent
Control HDC when the vehicle is being
Control HDC when the vehicle is being
tow-started, page
.
<
Online Edition for Part no. 01 41 2 604 304 - © 02/10 BMW AG