BMW 2010 X5 xDrive35d オーナーマニュアル
253
Brake force display
1.
Carefully remove the cover in the liftgate
panel with a screwdriver.
panel with a screwdriver.
2.
Rotate the bulb socket to the left and
remove.
remove.
3.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
turning it to the left for removal and replace-
ment.
4.
Insert the bulb socket in the liftgate and
engage it.
engage it.
5.
Before installing the cap, unclip the cargo
bay lamp.
Then lay the cap on its upper side and close
it, refer to arrow.
bay lamp.
Then lay the cap on its upper side and close
it, refer to arrow.
6.
Position the cargo bay lamp and clip it in,
refer to arrow.
refer to arrow.
License plate lamp
5-watt bulb, C11 12W
1.
Slide the lamp to the right with a screw-
driver, refer to arrow
driver, refer to arrow
1.
2.
Remove the lamp, arrow
2.
3.
Replace the bulb.
4.
Reinstall the lamp.
Center brake lamp
This lamp uses LED technology for operation.
In case of a defect, please go to a BMW Sports
Activity Vehicle Center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
In case of a defect, please go to a BMW Sports
Activity Vehicle Center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
BMW X6: changing lamps
Xenon lamps
These bulbs have a very long service life and
the probability of a failure is very low. If a lamp
should nevertheless fail, you can continue driv-
ing cautiously with fog lamps
the probability of a failure is very low. If a lamp
should nevertheless fail, you can continue driv-
ing cautiously with fog lamps
*
provided that
this is permitted by the country-specific laws.
ba8_e70ag.book Seite 253 Freitag, 5. Juni 2009 11:42 11
Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG