BMW 2010 X5 xDrive35d オーナーマニュアル
67
Locking
1.
Pull out the releasing tool.
The transmission lock is engaged again.
The transmission lock is engaged again.
2.
If necessary, insert the lock
*
and lock it.
3.
Close the cover in the bottom of the cup
holder and lay in the mat again.
holder and lay in the mat again.
4.
Close the cover of the cup holder and stow
the releasing tool.
the releasing tool.
Information on jump starting and towing, from
page
page
.
Turn signals/headlamp
flasher/high beams
1 High beams
2 Headlamp flasher
3 Turn signals
2 Headlamp flasher
3 Turn signals
Using turn signals
Press the lever beyond the resistance point.
To switch off manually, press the lever up to the
resistance point.
To switch off manually, press the lever up to the
resistance point.
Atypically rapid flashing of the indicator
lamp indicates that a turn signal bulb
lamp indicates that a turn signal bulb
needs to be replaced.
<
Signaling briefly
Press lever to resistance point and hold for as
long as you wish to signal.
long as you wish to signal.
Triple turn signal activation
Press the lever up to the resistance point. The
turn signal flashes three times.
You can activate or deactivate this function.
turn signal flashes three times.
You can activate or deactivate this function.
1.
"Settings"
2.
"Lighting"
3.
"Triple turn signal"
Triple turn signal activation is activated and
is stored for the remote control currently in use.
Washer/wiper system
1 Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or
rain sensor
*
4 Cleaning windshield and headlamps
*
5 Setting interval for intermittent wipe or sen-
sitivity of the rain sensor
*
ba8_e70ag.book Seite 67 Freitag, 5. Juni 2009 11:42 11
Online Edition for Part no. 01 41 2 602 756 - © 06/09 BMW AG