BMW 2010 X3 xDrive30i オーナーマニュアル
77
Reach into the opening and pull forward, refer
to arrow.
to arrow.
Before folding down the rear backrests,
remove the cover caps for the LATCH
remove the cover caps for the LATCH
child-restraint system. Otherwise, impressions
can be left in the seat cushion.
can be left in the seat cushion.
<
When you fold the backrest upright again,
be sure that the catch engages securely.
be sure that the catch engages securely.
This causes the red warning field in the recess
to disappear. Otherwise, cargo can be thrown
into the passenger compartment during brak-
ing or evasive maneuvers, thus endangering the
passengers.
to disappear. Otherwise, cargo can be thrown
into the passenger compartment during brak-
ing or evasive maneuvers, thus endangering the
passengers.
<
To ensure that the safety belts continue
to provide optimum protection, please
to provide optimum protection, please
follow the instructions on page
<
Ski bag*
To create a flat cargo surface, you can remove
the ski bag and replace it with a tray before fold-
ing the rear backrest forward. The tray is
inserted in the same way as inserting the ski
bag, refer to Inserting ski bag on page
the ski bag and replace it with a tray before fold-
ing the rear backrest forward. The tray is
inserted in the same way as inserting the ski
bag, refer to Inserting ski bag on page
.
Cargo area cover
Pull the cargo area cover out by the handle and
hook it into the rear holders.
hook it into the rear holders.
You can carry light objects such as articles of
clothing on the cargo area cover.
clothing on the cargo area cover.
Never place heavy, hard objects on the
cover. If you do so, they could endanger
cover. If you do so, they could endanger
passengers during braking or evasive maneu-
vers.
Do not allow the cover to snap back into place;
this can damage it.
vers.
Do not allow the cover to snap back into place;
this can damage it.
<
Removal
1.
Press the side buttons, refer to arrow
1.
2.
Pull the case toward the rear, refer to
arrow
arrow
2.
Installation
Push the case forward into the two side holders
until it locks into place.
until it locks into place.
Stowing* when rear backrest is folded
down
Holders for the case are mounted on the backs
of the rear seat backs, refer to arrows
of the rear seat backs, refer to arrows
1.
Guide the case in from the right side until it
locks into place, refer to arrow
locks into place, refer to arrow
2. As you do this,
the cargo area cover must always point in the
direction of travel and the loop of the partition
net must point upward.
direction of travel and the loop of the partition
net must point upward.
Online Edition for Part no. 01 41 2 602 348 - © 02/09 BMW AG