BMW 2008 M3 Sedan オーナーマニュアル

ページ / 160
Adju
stmen
ts
34
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off, refer to page
2.
Press the desired memory button
or 
and keep it pressed until the adjustment 
process has been completed.
If the 
 button was pressed accidentally:
Press the button again; the LED goes out.
Call-up with the remote control
The driver's seat position last stored is stored 
for the remote control currently in use.
You can select the occasion on which the seat is 
reset to that position.
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is opened.
When this Personal Profile function is 
used, first make sure that the footwell 
behind the driver's seat is free of obstacles. 
Failure to do so could cause injury to persons or 
damage to objects as a result of a rearward 
movement of the seat.
<
The adjusting procedure is halted immediately 
when you touch a seat adjustment switch or 
one of the memory buttons.
Activating/deactivating automatic call-
up
For operating principle refer to page
1.
Lightly push button
1 in the turn indicator 
lever up or down repeatedly until the sym-
bol appears in the display accompanied by 
the word "SET".
2.
Press button 
2.
3.
Lightly push button
1 in the turn indicator 
lever down repeatedly until the symbol 
appears in the display.
4.
Press button 
2.
5.
Use button 
1 to select:
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is 
opened.
>
Switch off automatic function.
6.
Press button 
2.
The setting is stored.
Safety belts
Observe the adjustment instructions on 
page
 to ensure the best possible per-
sonal protection.
<
Before every drive, make sure that all occupants 
wear their safety belts. Airbags complement the 
safety belt as an additional safety device, but 
they do not represent a substitute.
On the rear seats, the center belt buckle marked 
with the letters CENTER is solely intended for 
the center passenger.
Online Edition for Part no. 01 41 0 014 956 - © 02/08 BMW AG