BMW 2007 X5 4.8i SAV オーナーマニュアル
229
For care and maintenance of the headlamps,
please follow the instructions in the separate
Caring for your vehicle brochure.
please follow the instructions in the separate
Caring for your vehicle brochure.
For bulbs for which replacement is not
described and for checking and adjusting
described and for checking and adjusting
headlamp aim, please contact your BMW
Sports Activity Vehicle Center.
Sports Activity Vehicle Center.
<
Light-emitting diodes LEDs
Light-emitting diodes installed behind translu-
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.
Do not remove the covers, and never
stare into the unfiltered light for several
stare into the unfiltered light for several
hours, as irritation of the retina could result.
<
Xenon bulbs
The service life of these bulbs is very long and
the probability of a failure is very low, provided
that they are not switched on and off an unusual
number of times. If one of these bulbs should
nevertheless fail, it is possible to continue driv-
ing with great caution using the fog lamps, pro-
vided traffic laws in your area do not prohibit
this.
the probability of a failure is very low, provided
that they are not switched on and off an unusual
number of times. If one of these bulbs should
nevertheless fail, it is possible to continue driv-
ing with great caution using the fog lamps, pro-
vided traffic laws in your area do not prohibit
this.
Have work on the xenon light unit includ-
ing changing the bulb carried out only by
ing changing the bulb carried out only by
your BMW Sports Activity Vehicle Center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the
system, there is a danger of fatal injuries when
work is carried out improperly.
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the
system, there is a danger of fatal injuries when
work is carried out improperly.
<
Halogen bulbs:
Parking lamps and low beams
Parking lamps and low beams
H8 bulb, 35 watts
The bulb is pressurized. Therefore, wear
safety glasses and protective gloves.
safety glasses and protective gloves.
Otherwise there is a danger of injuries if the
bulb is accidentally damaged during replace-
ment.
bulb is accidentally damaged during replace-
ment.
<
1.
Turn the cover to the left and remove.
2.
Turn the bulbs to the left, pull off the con-
nector and replace.
nector and replace.
3.
Install in the reverse order.
Turn signals, front
24-watt bulb, PSY24W
1.
Unscrew bulb holder with bulb to the left,
refer to arrow, and replace.
refer to arrow, and replace.
2.
Install in the reverse order.
Side marker lamps, rear
To replace, please go to a BMW Sports Activity
Vehicle Center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Vehicle Center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG