BMW 2007 750i Sedan オーナーマニュアル

ページ / 254
 105
iDrive, for principle details, refer to page
.
1.
Press the 
 button to open the start 
menu.
2.
Move the controller toward "Climate".
3.
Turn the controller to select driver's side or 
passenger side.
4.
Turn the controller to select the field.
5.
Press the controller repeatedly until the 
desired program is displayed:
>
"low"
>
"medium"
>
"high"
Automatic recirculated air control/
recirculated air mode
You can respond to unpleasant 
odors or pollutants in the immedi-
ate environment by temporarily 
suspending the supply of outside air. The sys-
tem then recirculates the air currently within the 
vehicle. In AUC mode, a sensor detects pollut-
ants in the outside air and controls the shut-off 
automatically.
Press the button repeatedly to run through the 
following control sequence:
>
LEDs off: outside air flows into the vehicle 
continuously.
>
Left LED on, AUC mode: the system 
detects pollutants in the outside air and 
responds by blocking the supply of outside 
air when required.
>
Right LED on, recirculated-air mode: the 
supply of outside air into the vehicle is con-
tinuously blocked.
If the windows fog over in recirculated-air 
mode, then press the AUTO button or 
switch off the recirculated-air mode and 
increase the air quantity as needed.
The recirculated-air mode should not be used 
over a longer period of time, as the air quality 
inside the vehicle deteriorates continuously.
<
Automatic climate control, switching 
on and off
The air volume, the heater, and the 
air conditioner mode are all 
switched off. 
You can restart the automatic climate control by 
pressing any of its buttons except the REST 
button.
Temperature adjustment
Adjust the desired temperature 
individually on the driver's side and 
passenger side. Your settings 
appear on the status line of the 
Control Display.
The automatic climate control achieves this 
temperature as quickly as possible at any time 
of year, if necessary with the maximum cooling 
or heating capacity, and then keeps it constant.
When switching between different tem-
perature settings in rapid succession, the 
automatic climate control does not have suffi-
cient time to achieve the set temperature.
<
The highest setting switches on the maximum 
heat output regardless of the outside tempera-
ture. The lowest setting activates maximum air 
conditioning.
Using iDrive
1.
Open the start menu.
2.
Open "Climate".
3.
Turn the controller to select driver's side or 
passenger side.
4.
Turn the controller to select the field and 
press the controller.
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG